3D Fence Panels Compared: V-Fold Mesh and Euro Fence Panel 864

Scope of this comparison

For buyers evaluating 3d fence panels, panel shape and finish should be considered together with the required dimensions and fitting system. This comparison uses the published product information for two identified products from Hebei Houtuo Co., LTD. It does not rank either product or infer performance beyond the supplied descriptions.

The products are:

1. 3D Fence Panels Curved Fencing Garden Wire Mesh Fence With V Folds
2. Euro Fence Panel 864 Welded Wire Mesh Fencing Powder Coated Medium Duty

At-a-glance comparison

1. Mesh geometry and panel configuration

The V-fold product is defined by its curved or V-shaped strengthening bends. It has two V folds for heights from 630 mm through 1230 mm, three V folds for 1530 mm and 1730 mm, and four V folds for 2030 mm and 2230 mm. The V-fold distances are 100 mm or 200 mm, and the opening formats include 50×100 mm, 50×200 mm, and 55×200 mm. The panel can be reversed with the vertical barbs at the top or bottom.

The Euro Fence Panel 864 uses a 50×250 mm mesh opening. Its product information identifies a frame wire, horizontal wire, and vertical wire with different listed diameters rather than a V-fold configuration.

These are not interchangeable descriptions. A buyer should confirm the required opening, visual pattern, whether V-shaped bends are required, and whether one-sided barbs are suitable for the installation.

2. Coatings and finish options

The V-fold panel offers powder coating, hot-dip galvanizing, and PE coating as surface options. The process includes phosphating and galvanization followed by powder primer and top coating for some configurations. The available colours include Green RAL6005, Grey RAL7016, and Black RAL9005, with other colours also available.

The Euro 864 materials list powder coating and hot-dip galvanizing. They also describe galvanized wire, zinc phosphating, and powder coating, with assortments for hot-dip galvanized wire plus powder coating and electro-galvanized wire plus powder coating. Its listed colours include Green RAL6005, Grey RAL7016, and Black RAL9005, among others.

Because the source materials present several finish assortments, the purchase order should state the selected coating route and colour rather than relying on the general product name. The supplied information does not establish a single coating thickness, warranty period, or site-specific corrosion rating for either product.

3. Dimensions and wire selection

The V-fold panel covers a documented height range from 630 mm to 2230 mm and lists widths from 2000 mm to 2500 mm. Its wire diameter range is 3.2–5.0 mm. The exact fold count and dimensions should be matched to the selected height and configuration.

The Euro 864 lists heights from 750 mm to 1750 mm. Its detailed specification gives a 2000 mm panel width and a 50×250 mm mesh, while the short description gives a 2000–2500 mm width range. Its wire schedule is stated as 8 mm for the frame, 6 mm for horizontal wires, and 4 mm for vertical wires.

The width difference in the Euro 864 materials should be resolved during quotation because the short description and detailed specification do not present the same range. For both products, buyers should request a configuration-specific drawing or specification confirming panel height, width, mesh opening, wire dimensions, and quantity.

4. Installation-related requirements

Both products list posts, clamps, and post caps. The V-fold panel lists square, rectangle, or round posts, while the Euro 864 lists square or rectangle posts. Both list metal or plastic clamps and metal or plastic post caps.

The V-fold description states that the panels can be assembled with a variety of posts and are designed for easy assembly. The Euro 864 excerpt lists the post, clamp, and post-cap fittings described above. These published component lists do not replace a project installation method.

Before ordering, confirm post section, post spacing, clamp type, cap type, corner and gate details, ground conditions, and applicable structural or safety requirements.

For a closer look at the V-fold configuration, see 3D Fence Panels With V Folds.

5. Packing and procurement checks

The V-fold product is described as pallet packed. The Euro 864 is described as four panels per bundle followed by 25 bundles per pallet, and its detailed description also lists plastic film and pallet packing. Buyers planning wholesale fence panels should confirm the final bundle count, pallet dimensions, loading plan, and protection against coating damage in the shipment documents.

A practical request to a fence panel supplier should include:

• Product name and selected mesh geometry
• Panel height and width
• Mesh opening and wire diameter or wire schedule
• Surface treatment and colour
• Post, clamp, and cap selections
• Quantity, bundle arrangement, and pallet requirements
• A configuration drawing or approved specification

Conclusion

The V-fold panel and Euro Fence Panel 864 differ most clearly in mesh geometry, dimensions, and wire specification. The V-fold option uses V-shaped bends, several openings, and a fold count that rises from two to four across the height configurations. The Euro 864 uses a 50×250 mm opening and provides a distinct frame, horizontal-wire, and vertical-wire schedule. Both products offer coated or galvanized finish choices and fitting components, but the final selection should follow the project drawing, coating requirement, dimensions, and installation conditions rather than a general product label.